LEATHERSLIP SD LIQ.
Characteristics: slipping agent
Composition: organic substances
Aspect: transparent visocus
pH: 7,0
It is a good slipping agent

ACRYLEN RPD
Characteristics: retanning agent
Composition: synthetic polymer
Aspect: brown yellowish paste
pH: 5,0 – 6,0
Active matter: 45% +/-2%
It is proteic polymeric retanning agent of modern conception.

CROMOSINT AC
Characteristics: tanning / retanning agent
Composition: chrome containing aluminium salt
Aspect: clear green powder
pH: 3,0 +/-0,5
basicity: 40% approx
light fastness: excellent
Aluminium chrome complex tanning material, suitable for tannage and retannage.

CROMOSINT H
Characteristics: Tanning agent
Composition: synthetic chrome
Aspect: green powder
pH: 3,0 +/-0,5

CUIRTAN LT-8
Characteristics: tanning agent
Composition: vegetable extracts
Aspect: clear brown powder
pH: 4,0 – 4,5
It can be used both in tannage and retannage for the production of pure vegetable in combination with quebracho and or mimosa or for semichrome articles

CUIRTAN MN
Characteristics: tanning agent
Composition: vegetable extracts
Aspect: clear brown powder
pH: 4,0 – 4,5
It can be used both in tannage and retannage for the production of pure vegetable in combination with quebracho and/or mimosa and for semichrome articles

CUIRTAN AL-15
Characteristics: mineral tanning agent
Composition: aluminium formiate base
Aspect: white powder
pH: 3,0 – 4,0
It is to be used on suede splits, together chrome to obatain a good closure and brightness of colours

CUIRTAN ALT-F
Characteristics: mineral tanning agent
Composition: aluminium formiate
Aspect: white powder
pH: 3,0 – 4,0
It is to be used on suede splits, together chrome to obatain a good closure and brightness of colours.

CUIRTAN ALC
Characteristics: retanning agent
Composition: aluminium organic complex
Aspect: liquid from colourless to yellowish
pH: 3,5 +/-0,5
It is to be used as processing aid during chrome tannage and in the chrome retannage of nubuk and suede aticles, on splits it improves the brightness of colors and help the buffing operation

CUIRTAN ALS
Characteristics: retanning agent
Composition: aluminium complex
Aspect: white powder
pH: 2,5 +/-1
It is to be used on suede splits, together chrome to obatain a good closure and brightness of colours

CUIRTAN DFS LIQ.
Characteristics: tanning agent
Composition: Dihydroxydiphenylsulphonic
Aspect: yellow liquid
pH: 4,5 +/-0,5
Light fastness: Excellent
It is particularly indicated for white tannage of bovine and reptile leathers. It can be used also as retanning agent for chrome tanned leathers

CUIRTAN DL
Characteristics: tanning agent
Composition: Dihydroxydiphenylsulphonic based syntan
Aspect: from white to ivory powder
pH: 3,5 – 4,0
Light fastness: Excellent
It is particularly indicated for white tannage of bovine and reptile leathers. It can be used also as retanning agent for chrome tanned leathers.

CUIRTAN DL-XL
Characteristics: tanning agent
Composition: Dihydroxydiphenylsulphonic based syntan
Aspect: from white to ivory powder
pH: 3,5 – 4,0
Light fastness: Excellent
It is particularly indicated for white tannage of bovine and reptile leathers. It can be used also as retanning agent for chrome tanned leathers

CUIRTAN 2DS
Characteristics: tanning agent
Composition: Dihydroxydiphenylsulphonic
Aspect: ivory powder
pH: 4,0 – 4,5
Light fastness: Excellent
It is particularly indicated for white tannage of bovine and reptile leathers. It can be used also as retanning agent for chrome tanned leathers

CUIRTAN LW
Characteristics: tanning agent
Composition: phenolic syntan
Aspect: ivory powder
pH: 3,5 – 4,0
It can be used alone for wet white and in retannage of chrome tanned leathers.

CUIRTAN LW LIQ.
Characteristics: tanning agent
Composition: phenolic syntan
Aspect: yellow liquid
pH: 3,5 – 4,0
It can be used alone for wet white and in retannage of chrome tanned leathers

CUIRTAN WS
Characteristics: tanning agent
Composition: phenolic syntan
Aspect: from white to ivory powder
pH: 3,5 – 4,0
It can be used both alone or in combination with natural tanners on all type of leathers. It gives fullness and fine grain.

CUIRTAN WS LIQ.
Characteristics: tanning agent
Composition: phenolic syntan
Aspect: limpid clear brown liquid
pH: 3,5 – 4,0
It can be used both alone or in combination with natural tanners on all type of leathers. It gives fullness and fine grain.

CUIRTAN NO-S
Characteristics: Retanning agent
Composition: phenolic based syntan
Aspect:beige powder
pH: 4,0 +/-0,5
It is a substitution syntan suitable for the production of soft and full leathers.

CUIRTAN OSB
Characteristics: pretanning agent
Composition: blend of phenolic sulphonic syntan
Aspect: brown powder
pH: 3,5 – 4,5
It is a substitution syntan mainly adviced for the retannage of all type of leathers. It allows to obtain clear and bright dyeing, specially if used on suede splits.

CUIRTAN OSB LIQ.
Characteristics: pretanning agent
Composition: blend of phenolic sulphonic syntan
Aspect: liquid dark brown
pH: 3,5 – 4,5
It is a substitution syntan mainly adviced for the retannage of all type of leathers. It allows to obtain clear and bright dyeing, specially if used on suede splits.

CUIRTAN RFL
Characteristics: Retanning agent
Composition: phenolic and vegetable based syntan
Aspect: clear brown powder
pH: 4,2 +/-0,5
It is an excellent tanning and retanning agent,we recommend its use in the retannage of chrome tanned leathers and in tannage and retannage of vegetable leathers.

CUIRTAN TT-50
Characteristics: tanning agent
Aspect: powder from white to gray, due to its hygroscopicity may create small solidifycation
pH: 1,4 at 20°C
It is a salt based on titanium with tanning properties. It is recommended to produce eco-friendly articles, it is also hypoallergenic. It gives clear leathers.

CUIRTAN OX
Characteristics: tanning agent
Composition: poly aldehyde
Aspect: liquid from colourless to yellowish
pH: 3,0 – 4,0
It is compatible with tanning mineral salts and pickle baths in any percentage. In vegetable tannage, if used as pretanning agent it improves the penetration of vegetable extracts, while on chrome tannage, if used as pretanning agent it give firm and fine grain.

CUIRTAN WG
Composition: siloxane polymer
Aspect: viscous blue liquid
pH: 10,0-11,0
It finds its best use as retanning agent on wet blue leathers, mainly on velour splits since it is able to give firmeness and good buffability while on full grain it givs very fine and firm grain.

CUIRTAN DP-N
Charcateristics: synthetic tanning for dyeing and retannage
Composition: naphtalen sulphonic based
Aspect: straw yellow powder
pH: 6,0 – 6,5
It can be used as dye dispersing agent both on wet blue leathers and vegetable skins and as well as synthetic tanning agent in the retannage phase.

LEATHERFYLL FC
Characteristics: filler
Composition: synthetic and organic components
Aspect: beige powder
pH: 6,5 – 7,5
We advice its use in retannage and in fatliquoring process.

LEATHERFYLL PRF
Characteristics: filler
Composition: natural proteins
Aspect: powder from clear yellow to beige
We advice its use in retannage and in fatliquoring process.

POLYMER 90T
Characteristics: retanning agent
Composition: acrylic resin
Aspect: transparent liquid
pH: 4,0 – 4,5
Its main use in chrome retannage.

POLYMER DM-50
Characteristics: retanning agent
Composition: melamine resin
Aspect: white powder
pH: 7,5 – 8,5
It is to be applied during the retannage/dyeing of all chrome tanned leathers.

POLYMER ER/M
Characteristics: retanning agent
Composition: solution of acrylic acid copolymers
Aspect: colourless liquid
pH: 5,0 – 6,0
Active matter: 30% +/-2%
It is to be applied on wet blue leather in neutralization or after the fatliquoring process. It gives full and soft skins.

POLYMER CCU
Characteristics: retanning agent
Composition: acrylic resin
Aspect: fuxia liquid
pH: 4,5 – 5,5
Active matter: 20% +/-2%
It is to be applied on wet blue leather in neutralization or after the fatliquoring process. It gives full and soft skins.

POLYMER FNN
Characteristics: retanning agent
Composition: acrylic polymer solution
Aspect: yellow brownish liquid
pH: 6,5 – 7,5
Active matter: 36% +/-2%
It is a particular acrylic copolymer that has an excellent filling power. It also helps the distribution of fatliquors and can be used for the production of white or pastel colours where light fastness is requested.

POLYMER WHITE
Composition: acrylic copolymer
Aspect: white liquid
pH: 4,0-5,0
Active matter: 40% +/-1
It is a resin suitable for white leathers that can be use to replace titanium oxide and pigment based on titanium oxide.

POLYMER RDC LIQ.
Characteristics: tanning agent
Composition: Diciandyamide
Aspect: colorless liquid
pH: 7,5 – 8,5
Active matter: 40% +/-2%
It is mainly suitable for the retannage both of white tanned leathers and vegetable. It gives smooth grain leaving the natural softness.

POLYMER ME
Characteristics: retanning agent
Composition: melamine resin
Aspect: white powder
pH: 7,5 – 8,5
It is to be applied during the retannage/dyeing of all chrome tanned leathers.

POLYMER N5
Characteristics: tanning agent
Composition: diciandyamide
Aspect: beige powder
pH: 7,5 – 8,5
It is to be applied during the retannage/dyeing of all chrome or vegetable tanned leathers.

POLYMER N7T
Characteristics: tanning agent
Composition: diciandyamide
Aspect: beige powder
pH: 7,5 – 8,5
It is to be applied during the retannage/dyeing of all chrome or vegetable tanned leathers.

POLYMER ACM
Characteristics: retanning agent
Composition: acrylic resin
Aspect: light yellowish liquid
pH: 4,5 – 5,5
Active matter: 38% +/-2%
It is to be applied on wet blue leather in neutralization or after the fatliquoring process. It gives full and soft skins.

POLYMER SM-20
Characteristics: retanning agent
Composition: styrol maleic resin
Aspect: clear brown dense liquid
pH: 7,4 – 7,9
Active matter: 20% +/-2%
It is to be used on wet blue leathers, after the fatliquoring process. It gives full and gummy skins.

POLYMER SMP
Characteristics: retanning agent
Composition: acrylic – styrol polymer
Aspect: clear brown dense liquid
pH: 9,0 – 9,5
Active matter: 20% +/-2%
It is to be used on wet blue leathers, after the fatliquoring process. It gives full and gummy skins.